How to dehydrate a pulsator washing machine: hot topics and practical guides on the Internet
Recently, home appliance usage skills have become one of the hot topics on social platforms, especially the dehydration function of pulsator washing machines. Many users reported that improper operation resulted in incomplete dehydration of clothes or abnormality of the machine. This article will combine the hot discussions on the Internet in the past 10 days to provide a structured analysis of the dehydration operation steps, common problems and solutions of the pulsator washing machine.
1. Pulsator washing machine dehydration principle and operating steps
Pulsator washing machines generate centrifugal force by rotating the inner barrel at high speed to throw out the moisture in the clothes. The following is standard operating procedure:
| steps | Operating Instructions |
|---|---|
| 1. Loading clothes | Put the clothes evenly into the inner bucket, not exceeding the maximum capacity (usually 70% of the inner bucket) |
| 2. Select program | Turn the program knob to the "Dehydration" position, or select a mixed program including dehydration (such as "Quick Wash + Dehydration") |
| 3. Set parameters | Adjust the dehydration speed (800-1200 rpm), a higher speed is recommended for heavy clothes |
| 4. Start dehydration | Close the cover and press the start button. The dehydration process usually lasts 3-5 minutes. |
2. Top 5 popular issues related to dehydration in the past 10 days
| Ranking | question | Number of discussions (times) |
|---|---|---|
| 1 | Washing machine vibrates violently during dehydration | 18,200+ |
| 2 | Clothes are still damp after dehydration | 15,700+ |
| 3 | Dehydration program cannot be started | 12,400+ |
| 4 | Automatically pause during dehydration | 9,800+ |
| 5 | Abnormal dehydration noise | 7,600+ |
3. Solutions to high-frequency problems
1. Dehydration and shock treatment:
• Check that the washing machine is level (adjust the foot screws)
• Make sure the clothes are not tangled (shake the clothes out again)
• Avoid dehydrating a single large piece of clothing alone (such as a blanket that needs to be paired with other clothing)
2. Incomplete dehydration:
| Possible reasons | Solution |
|---|---|
| clogged drain pipe | Clean filters and drain pipes |
| Speed set too low | Increase the dehydration speed to more than 1000 rpm |
| Overload of clothing | Reduce the amount of laundry to 2/3 of the inner tub |
4. Maintenance suggestions for dehydration function
• Clean the drain filter once a month
• Run a "Bucket Clean" program quarterly using a dedicated cleaner
• Take out the clothes promptly after dehydration is completed to avoid odor generation
• Disconnect the power supply and keep the door open when not in use for a long period of time
5. Comparison of dehydration functions of different brands
| Brand | Dehydration speed range | Features |
|---|---|---|
| Haier | 700-1200 rpm | Intelligent Balance Detection 2.0 |
| Beautiful | 800-1400 rpm | Spiral dehydration technology |
| little swan | 600-1200 rpm | Water magic cube anti-entanglement system |
From the above structured analysis, it can be seen that the correct use of the dehydration function of the pulsator washing machine requires attention to the loading method, parameter settings and daily maintenance. If the problem persists, it is recommended to contact the official after-sales service to check the status of the motor or clutch. Mastering these tips can effectively improve laundry efficiency and extend the life of the machine.
check the details
check the details
en
